Quartz, Quartzite, Marble, Granite Kitchen Countertop Park City

Are you looking for information about Quartz, Quartzite, Marble, Granite Kitchen Countertops Park City area? Is it important for you to get details about Luxury Quartzite, Quartz, Marble, Granite Kitchen Countertop Park City has to offer? Do you want to get info about the Best Quartzite,Quartz, Marble, Granite Kitchen Countertop Company Park City has ? You're in the right place!

Park City  Kitchen renovations & Home improvements

   Luxury Quartzite, Quartz,Marble,             Granite Kitchen Countertop
                            Park City

Learn More About Best Quartzite, Quartz, Marble,                           Granite Kitchen Countertop company
                                Park City has to offer

If you are looking to find the best Park CIty UT Kitchen renovations & Home improvements Company - you are off to a good start...

Kitchen Renovations & Home Improvements Park City   FAQ

Q: Best material for a kitchen countertop and why? Narrowed the selection to granite or quartz but need input.?


Granite is like a piece of diamond... every piece is mined and will be different. Color base and pattern varies as with its density. Take care when choosing a piece of granite (any good granite supplier will want you to do that). Granite is porous so you do need to seal Granite once a year! Sealing unlike a lot of people say is not hard... it's easier than waxing your car! (Got flat surface) Granite also have a MOH (a measure of hardness) of 7 to 7.5 depending on your granite density. Since Granite (as seen used in monuments) has been exposed to sunlight for longer than you or I have been on earth... it is colorfast even when used outside. 

Quartz is a man-made product. Have a MOH of 8 (that of glass or topaz) You do not have to seal it whatsoever... although it will have a less polish look than Granite... you do need to polish Quartz more than Granite (Granite contains natural mineral and oils in it) to bring out the shine. Quartz is color enhanced... it will bleach a little in the sun... but I am sure we will develop a technology in the pigment to keep that from happening. Color and pattern consistency is less varied in Quartz. 

Quartz is more mom-friendly since it is maintenance free. But Granite has a natural beauty and luster that man has not found a way to duplicate yet. Both are awesome surfaces... way better than Corian (its Acrylic and will scratch, never go with the marble vein look nor the dark color [shows too many scratches}), repairable but would you like to buff it every other week? 

Both Quartz and Granite will not be scratched by a steel blade of MOH 6.5 or less, diamond coated blade is a no-no (they are cut by diamond blades to be used as countertops). If a piece of diamond can fracture under a laser (constant expose of high heat) so can Quartz and Granite... so use a protective surface (like a wood cutting block) when using a deep-fryer/crock pot. But if your pan caught on oil-fire... you can rest it on either Granite or Quartz to let it burn out... no problem... put out cigarettes lights too. 

Corian or other acrylic surface has no chance against any heat... (think cigarette burn marks on public toilet seats). 

Since both are great products and will increase home values... more than anything it all comes down to color!!! Without the correct color to coordinate it with your cabinets and walls... it will still be a job not done right! 

Source(s):Am an Interior designer specializing in Kitchen design. ASID & CKD - Yahoo Answers

Q: Quartzite countertops? Good or bad?

We were planning on remodeling our kitchen with granite countertops, but the countertop design that I fell in love with is quartzite. Anyone have any experience with this type of countertop stone or know anything about it in this type of application? I know the basic definition, but I don't know how it compares to granite.



UNBELIEVABLE product. This is the new thing with countertops, and it is similar to granite only better. Same applications as granite installation wise, the only difference is there really isn't any maintenance. This material doesn't stain and is denser than any other product on the market today. The only problem is it is very costly so if that doesn't bother you I suggest you use it instead of granite.

source: Yahoo answers

Park City  Kitchen Renovations & Home Improvements

Estimates Quartzite, Quartz, Marble, Granite Kitchen Countertop Company Park City

Looking For Kitchen Renovations and/or Home Improvements - Park CIty - EXPERTS?

Perhaps You Are Searching Everywhere For...

    • Quartz Quartzite Marble Granite Kitchen Countertop Park City
    • Luxury Quartzite Quartz Marble Granite Kitchen Countertop Park City
    • Best Quartzite Quartz Marble Granite Kitchen Countertop company Park City
    • Estimates Quartzite Quartz Marble Granite Kitchen Countertop company Park City
    • Best Prices Quartzite Quartz Marble Granite Kitchen Countertop company Park City

                                                        Your Search is Over!

    image source: Creative Commons Attribution-ShareAlike License

Creative Commons Attribution 2.0 Generic l

Creative Commons Attribution 2.0 Generic l

Quartz Quartzite Marble Granite Kitchen Countertop Park City: Tips...

When you need help finding the top expert resources for Kitchen renovations Home improvements - Park CIty - this is your ticket...

Solid surface - Materials information

Solid surface is a man-made material usually composed of a combination of Alumina Trihydrate (ATH), acrylicepoxy or polyester resins and pigments. It is most frequently used for seamless countertop installations.

Solid Surface Top Seamless Integral Kitchen Sink

Integral Cove Slash with Wall Panel

The solid surface was first introduced by DuPont in 1967 under the name of Corian. Since the expiration of their patent, other manufacturers have also introduced their brands as well.





Performance characteristics[edit]

Solid surface is a non-porous low-maintenance material used for surfaces such as countertops. It can mimic the appearance of granitemarblestone, and other naturally occurring materials, and can be joined nearly invisibly by a trained craftsman. Typically manufactured in sheet form for fabrication into finished countertops, the solid surface can also be cast into a variety of shapes, including sinksshower pans, and bathtubs. Sheet goods can also be heated and bent into three-dimensional shapes using a process called thermoforming, which adds to the versatility of the product. Color and design flexibility are key factors when choosing engineered composites over natural stone.

In a residential setting, a solid surface can be used as kitchen countertops, bathroom vanity tops, and shower and tub surround. Countertop fabricators typically join solid surface sheets into desired shapes using a two-part adhesive, after which the cured joint is machined flat. The same method is used to build up edge thickness, which can be profiled using tools and techniques similar to those used to work hardwoods.

A major appeal of solid surface is its impermeability. Solid surface sinks can be joined to the countertop surface with no gaps, which eliminates areas for water to collect and bacteria to grow. Integral backslashes can also be created that follow the contours of the wall “seamlessly” and without gaps.

Should the material become scratched or broken, the solid surface can, in most cases, be repaired quickly by a certified solid surface repair company or trained fabricator. Cracked sinks can be replaced as well. Because the surface is solid throughout, a countertop that has undergone years of wear and tear can be refinished. The installed product is available in a variety of finishes, ranging from matte to high-gloss, although most manufacturers recommend a matte or satin finish for ease of maintenance.


Solid surface is available in hundreds of colors and visual textures, ranging from solid colors to sparkling, marbleized, or granite effect. Dozens of multinational companies manufacture solid surface sheet goods and sinks for the world market; and hundreds of smaller, regional manufacturers produce for local markets.

Although solid surface faces competition from natural stone and engineered stone/quartz surfacing, the material is popular in Asia, particularly in residential new construction. An emerging market for a solid surface is in commercial and industrial settings, where its non-porous characteristics, combined with durability, renewability, and formability make it the material of choice for many designers and architects. Also appealing is the wide range of colors and textures, as well as the ability to custom-color the material for large projects. Hospitals, in particular, employ large amounts of solid surface for sinks, showers, nursing stations and wall cladding, because its seamless properties eliminate gaps and crevices that harbor harmful bacteria.


Solid surface is manufactured by mixing acrylicepoxide or polyester resin with powdered bauxite filler and pigments. The material chemically cures and is heated to 60°C or more. Cured material is then cut in sheets or shapes and sanded on one or both sides depending the brand used. Sometimes the material is brought to 160°C and cooled, to improve its heat resistance.

The acrylic-modified polyester solid surface can be mixed one sheet at a time using different formulations, effects, and appearances. An acrylic-modified polyester solid surface can be injected into molds to produce various solid decorative design figures.

Solid-surface manufacturing companies may be members of the trade organizations American Composites Manufacturers Association, ISFA (International Surface Fabricators Association, and ICPA (International Cast Polymer Association).[1] These organizations identify the product under the "brand" of MasterCast Engineered Composites.


surface fabricator shapes and installs functional and decorative surfaces, usually in buildings. Surface fabrication, as a distinct professional enterprise, usually involves complex tasks of surface shaping. A leading case is countertop fabrication.


For interior spaces, surfaces include solid coverings or decking for floors or walls, and countertops for kitchens, bathrooms, and workspaces. Natural surfaces are composed of naturally occurring materials like wood, stone, mineral, clay, gum, and resin. Synthetic surfaces contain, in addition to any natural materials, man-made substances such as metal alloys or polymers. Solid surfaces are synthetic surfaces manufactured from polymeric materials.


Tools of surface fabrication include routersdrillstemplatesclampsovenssuction cup grips, and table saws. Larger surface fabricators may also use CNC routers. For all but the simplest jobs, surface fabrication usually takes place in the workshop, after which the finished product is assembled and installed at the work site. Installation of multi-part surfaces, such as "L" and "U" shaped countertops, often involves complex work with specialized tools, to create a seamless result.


Solid surfaces are used in the following environment:

  • Kitchen/Bathroom: kitchen worktops with integrated sink, vanity countertop, bathtub etc.
  • Hospitality/Catering: bars, tables, reception desks etc.
  • Shop Fitting: displays, counters, wall cladding etc.[2]
  • Airports: check-in counters
  • Public buildings: displays in museums, facades, meeting tables etc.
  • Hospitals: laboratory countertops, decontamination sinks, endoscopy etc.

Solid surface is priced to compete with natural stone or quartz surfacing. It is available in many colors and patterns. The material can be formed to shape, which makes it appealing to commercial and industrial designers. Specialist fabricators possess the skills and knowledge necessary to provide advice and customer service.

Certain high-heat applications (anything above 400 F /200 C) are discouraged, due to the danger of cracking. Because scratches in solid surface appear white to the human eye, most dark colors are not recommended for high use areas.

Related materials[edit]

  • Engineered stone uses quartz powder and pigments and generally requires different tools from those used with solid surface materials.
  • Epoxy granite

See also[edit]


  1. Jump up^ ICPA- Arlington, VA
  2. Jump up^ "Endless Possibilities With Solid Surface Display". 

source: Wikipedia

The text is available under the Creative Commons Attribution-ShareAlike License;

    Best Prices Quartzite Quartz Marble Granite Kitchen Countertop company Park City

    Is it time to renew your kitchen,. Ready to get a quote? Call us Now... 435-222-3075

    Is your current kitchen worn out and out of style

    Get your free in-home consultation

    Don't you just love easy choices? Call now 435-222-3075

    Do nothing and keep your old worn out kitchen OR  Get a quote to get your dream kitchen!

    Get in Touch With Custom Lux Quartzite Kitchen Countertop Park City  to help you draft and build your dream kitchen!!
    6440 Highway 224
    PArk City, UT  84060
    Call us at 435-222-3075
    email: [email protected]

    We cover the county
    Map Data
    Map data ©2018 Google
    Map DataMap data ©2018 Google
    Map data ©2018 Google